BuckBoost™ Drive System

The ProPlex BuckBoost™ Drive System is a unique, patent-pending technology that completely overcomes the cable length challenges of low voltage LED lighting, especially LED “neons” and tapes. This revolutionary new system allows centralized and remote (up to 150m) location of drives, mains power and PSU’s

FloppyDrive 4x2 PortableMount Drive

DMX Control for LED Neon, Tape, and Other Low-Voltage Systems. Perfect for FloppyFlex LED neon, FloppyTape LED tape, and other 12 or 24 VDC LED systems

FloppyDrive Digital PortableMount Drive

DMX control for FloppyFlex Digital LED Neon. One 24 VDC FloppyFlex Digital output. Up to 1x 15-meter run

FloppyDrive DIN Rail Mount

DMX dimming for 12 or 24V LED Tapes, Neons, and other low voltage systems. Two 12V or 24V 2-, 3-, 4-, or 5-wire outputs. Perfect for FloppyFlex and FloppyTape

FloppyDrive Digital DIN Rail Mount

DMX “pixel” control for RGB or RGBW FloppyFlex Digital. One 24V output drives up to 15m of RGB or 10m of RGBW FloppyFlex Digital

0-10V DMX Converter DIN Rail Mount

Bidirectional! Converts 0-10V to DMX or DMX to 0-10V. Four operational modes: “Theatre” Out, “Ballast” Out, “Theatre In”, “Ballast In”. 4x 0-10V inputs or outputs

GBS 5-Port Gigabit PoE Switch DIN Rail Mount

One Gigabit PoE In port, four Gigabit PoE out ports. Overall 62W PoE power budget, DIN rail mount

GBS 5-Port PoE Switch DIN Rail Mount

One Gigabit port, four 100 Mbps PoE ports. Overall 60W PoE power budget, DIN rail mount

IQ-4 4-Way Ethernet-DMX Node DIN Rail Mount

Powerful, 4-way bidirectional ArtNet/sACN-DMX data conversion, patching and merging. DIN rail mount

Opto-Splitter 1x4 DIN Rail Mount

Optically isolated DMX Splitter with 1 input, 4 outputs. DIN rail mount. RDM version available

6-Track DMX Record/Playback Device DIN Rail Mount

DMX Record/Playback and Backup. Record/Playback 6 dynamic scenes, up to 450 minutes total. Remote playback triggering by contact closure or DMX. Remote playback dimming by DMX